How To Ensure The Working Properties Of Picador Sink?

Sinks are a very important part of all the drainage systems. When you construct a house or building of your own, you emphasize that the best quality sinks can be placed in your house. Picador sinks are an important part of the sink and also called Sink Strainer Plug. Know here more on how to choose Picador Sink.

Construction and function of Picador Sink

This is one of essential elements of a sink strainer. Most of the people have a misconception about repairing, installing and mechanism of sink plug. A Sink Plug has four parts and its mechanism is based on it. Lift rod, clevis strap, pivot rod, and stopper are the four major parts.

You can see all the parts of the sink.

They operate by simply pulling and pushing them. When you pull the lift rod, the water flows down from the faucet to the drain. When you push the lift rod, the water will start getting accumulated in the basin. On the other hand, clevis strap and pivot rod are hidden parts.

Parts of Sink

• Stopper: The stopper has plug and has fin-like, smooth surface and round shape body. There is a hole or loop at the end of the plug. This hole is attached to the plug. While fixing the plug into the sink, the bottom of the plug should be pointed to the drain pipe opening.
• Lift Rod: At the exposed part of the sink plug, is the lift rod. This plays an important role in the working of the plug. This rod works in two ways; one is pulling it and second is pushing it. You can check its working and ensure proper functioning. For placing the lift rod correctly you have to insert the end part of the rod into the holes of the clevis strap. Then tighten the clevis strap.
• Clevis Strap: Clevis strap is made up of holes. End hole is shaped like “C”. The spring clip is put in this hole and then connected with each other. This clip ensures the right functioning of the pivot rod.
• Pivot Rod: You should directly connect pivot rod, to the Sink Strainer. There are two ends of the pivot door. These ends vary from each other in length. The shorter end connects with the large ball which is inserted in the sink’s opening. This goes from the stopper hole. This rod basically works for pushing the stopper up.

How to ensure the proper function of the Picador Sink?

• Plug the sink strainer in the pivot rod
• Then connect the pivot rod with clip strap
• Ensure the right connection of pivot rod with sink strainer and other parts.

Different suppliers of picador sink takes care of the demand of all type of sinks.